Description:

Features:

    •   The WorkStation is designed to drill a hole perpendicular to the surface of the material as well as at 15° intervals
    •   The hole should be the same size as the drill bit you are using. For example, a 1/8 drill bit used in the Drill Press should produce a 1/8 hole
    •   To ensure that, mount the Drill Press to a workbench so it can't move when you pull the lever to drill the hole and use some type of clamp to hold what you are drilling into
    •   The Work Station can be rotated to the horizontal position to be used as a stationary holder for the rotary tool
    •   When polishing or sanding, it is sometimes less fatiguing to control the work piece and keep the tool stationary. By locking the tool horizontally, you can easily do that.
    •   Using the tools stand allows you to hang up y rotary tool and attach the 225 Flex Shaft to it
    •   The Flex Shaft allows you to have increased control over the accessory you are using. The Flex shaft is particularly useful when performing precision or detailed work
    •   In order for the Flex Shaft to perform properly, the rotary tool should be placed above the nose of the Flex Shaft when the Flex Shaft is in use
    •   If the rotary tool is placed below the nose of the Flex Shaft, the cable in the Flex Shaft will disengage and the accessory will stop rotating.

Specifications:

Drilling Depth 2
Dimensions 14 x 8 x 7.4
Brand Dremel