Description: The Pure50+ is a two-component adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The Pure50+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in solid concrete base materials. General application and uses include: Bonding threaded rod and reinforcing bar into hardened concrete, Evaluated for installation and use in dry and wet holes, Can be installed in a range of base material temperatures. Features: • International Code Council, Evaluation Service (ICC-ES) ESR-3576 for cracked and uncracked concrete • Code Compliant with the 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC, and 2009 IRC • Conforms to requirements of ASTM C 881 and AASHTO M235, Types I, II, IV and V, Grade 3, Classes B & C (also meets Type III except for elongation) • Department of Transportation listings - see www.DEWALT.com or contact transportation agency • Tested in accordance with ACI 355.4 / ASTM E488, and ICC-ES AC308 for use in concrete (Design according to ACI 318-14 Chapter 17 and 318-11/08 Appendix D) • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading • Compliant with NSF/ANSI Standard 61 for Drinking Water System Components - Health Effects; minimum requirements for material in contact with potable water and water treatment • Evaluated and recognized for freeze/thaw performance Specifications: Material: Two-Component Size: 21 oz. Anchor Size range: 3/8 " to 1-1/4 " Diameter Threaded Rod / No. 3 to No. 10 Rebar Temp. Range (F) 50 Degrees to 104 Degrees Mixing Ratio 1:1 Curing Time: 12 min - 90 min Working Time: 4 hr - 24 hr Color: Gray |