Description: Titebond WeatherMaster ULTIMATE MP Sealant is a premium-grade, superior polymer, multipurpose exterior sealant that offers unbeatable adhesion to most common building materials. It is specifically formulated to outperform all other sealant technologies, including VOC solvent, silicones, tripolymers and urethanes. It can be extruded in extreme temperatures, remains permanently flexible with no shrinkage, adheres well to damp surfaces and provides a weather-tight seal against water, wind, dust and dirt. Features: • Outperforms Silicone, Tripolymer and Urethane Sealants
• Excellent Adhesion to most common building materials including Kynar and Hylar 5000 coated metals
• Compatible with all types of foam
• Applies easily in extreme weather conditions and provides a permanently flexible, weather–tight seal
• Uv–Resistant and Voc–Compliant
• Approved for use on buildings in both Miami–Dade County and Throughout the country
Application Guidelines: Above 0°F (–18°C)
–75°F to 300°F (–59°C to 149°C) white & colors, –40°F to 350°F (–40°C to 177°) translucent
Cartridge/caulking gun, bulk/sausage gun
For a 1/4 " bead, approximately 10–15 minutes, depending on temperature and humidity. Recommended times are based on 70°F and 50 " RH. Cool dry conditions will slow cure, hot and humid conditions will reduce cure times
Surfaces must be cleaned down to the original substrate and free from any material that may prevent adhesion. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. To ensure neat sealant lines, mask areas adjacent to joints. Once the sealant is dry to the touch and does not transfer, remove the masking tape. Not for use with nail holes or butt joints. Not designed for continuous submersion or use below the waterline.
Excellent adhesion to Kynar™ coated materials. For use on polycarbonate, check with polycarbonate supplier on compatibility. Do not apply Metal Roof Translucent to polycarbonate due to solvent cracking.
WeatherMaster ULTIMATE MP is intended for exterior use. If used indoors, sealant may need to be painted •. Painting may occur two hs after application with a high–quality acrylic, water–based (latex–based) paint. For other paint types, a compatibility test is recommended.
Uncured material may be cleaned with isopropyl alcohol. (Titebond WeatherMaster ULTIMATE MP Translucent ( – 71111) can be cleaned with mineral spirits or similar solvent before cured.) After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents. NOTE: Test solvent on an out–of–the–way area to make sure it will not mar or attack the surface.
Store unused product in tightly closed container, in a dry location at or below 75°F (27°C).
Air, sealant and surface temperature should be above 0°F(–18°C).WeatherMaster ULTIMATE MP Sealant is intended fo
Above 0°F (–18°C)
–75°F to 300°F (–59°C to 149°C) white & colors, –40°F to 350°F (–40°C to 177°) translucent
Cartridge/caulking gun, bulk/sausage gun
For a 1/4 " bead, approximately 10–15 minutes, depending on temperature and humidity. Recommended times are based on 70°F and 50 " RH. Cool dry conditions will slow cure, hot and humid conditions will reduce cure times
Surfaces must be cleaned down to the original substrate and free from any material that may prevent adhesion. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. To ensure neat sealant lines, mask areas adjacent to joints. Once the sealant is dry to the touch and does not transfer, remove the masking tape. Not for use with nail holes or butt joints. Not designed for continuous submersion or use below the waterline.
Excellent adhesion to Kynar™ coated materials. For use on polycarbonate, check with polycarbonate supplier on compatibility. Do not apply Metal Roof Translucent to polycarbonate due to solvent cracking.
WeatherMaster ULTIMATE MP is intended for ext
Pending Reviews
|
